BEAMALARM.COM

LG 3802 ELECTRONIC COMBINATION LOCK

by LG Lock

3802 ELECTRONIC COMBINATION LOCK -

OPERATING INSTRUCTIONS

FEATURES

TWO COMBINATIONS

Manager and one User combination.

MANAGER MODE

Add/Temporarily Disable/Remove user.

AUDIO / VISUAL SIGNAL

Double signal indicates entry is valid or accepted. Triple signal indicates invalid or not accepted.

WRONG TRY PENALTY

Four invalid combinations initiates five minute delay period.

LOW BATTERY WARNING

Repeated audio signal (beeping) during operation indicates battery low.

 

CHANGING COMBINATIONS

(Lock signals twice after each valid entry.)

Enter six zeros.

Enter existing combination once.

Enter new combination twice.

Invalid Combination Entry

Lock signals three times and old combination still valid.

 

ADD USER (Manager feature on/y.)

Enter Manager combination and HOLD DOWN LAST DIGIT of COMBINATION until the lock signals with TWO double beeps.

PRESS 1. Lock signals twice

Enter user combination twice. (The lock signals twice after each valid entry.)

 

DISABLE USER (Manager feature on/y.)

Enter Manager combination and HOLD DOWN LAST DIGIT of COMBINATION until the lock signals with TWO double beeps.

PRESS 2. Lock signals once.

User is temporarily disabled.

 

REINSTATE DISABLED USER (Manager feature on/y.)

Enter Manager combination and HOLD DOWN LAST DIGIT of COMBINATION until the lock signals with TWO double beeps.

PRESS 1. Lock signals once.

User is reinstated.

 

REMOVE USER (Manager feature on/y.)

Enter Manager combination and HOLD DOWN LAST DIGIT of COMBINATION until the lock signals with TWO double beeps.

PRESS 3. Lock signals once.

User is permanently removed.

 

WRONG TRY PENALTY

Entry of four consecutive invalid combinations starts a 5-minute delay period.

- On any keystroke the lock will respond with three beeps.

- LED flashes red at 10 second intervals.

At the end of the delay period, two more consecutive invalid combinations, will restart an additional 5-minute delay period.

 

BATTERY LOW WARNING

Repeated Beeping during an opening indicates that the battery is low and needs immediate replacement.

Uses one (1) 9-Volt Alkaline Battery

 

CHANGING BATTERIES

Remove Battery Cover

Connect one 9 volt Alkaline Battery to battery clip

Insert battery into bottom of housing.

Replace battery cover by placing one side of cover into housing, then snap other side into position.

 

© Barry Brideau 2003-2017